Home > Metallografische Produkte > Mets Low Speed Diamond Saw

METS Low Speed Diamond Saw

 

The machine has been designed for easy operation. A sample is mounted to a sample holder and attached to the arm. An appropriate load is applied by adjusting the counterbalancing weight and the automatic stop switch is set. The sample is positioned in any starting position relative to the diamond wheel and then a micrometer is used for precise sample positioning. With the diamond wheel rotating slowly and coolant in the reservoir, the arm is gently lowered until the sample touches the diamond wheel. Cutting will continue until the automatic cut-of switch is triggered.

 

 

The Model METS 100 saw is designed to cut with diamond, CBN and abrasive blades. Diamond blades are used for most applications while Cubic Boron Nitrite (CBN) blades are used with iron and cobalt base alloys, nickel base super alloys, and lead base alloys. Abrasive wheels (A1203 and SiC) can be used for cutting both ferrous and non-ferrous based materials and have also been used for dry cutting of superconductor materials. Lapmaster provides a wide selection of cutting wheels. Please see our Cut-Off Wheel Chart and our Diamond Wafering Blade Chart for further details on selecting an appropriate wheel for your application.